Maybe the stuff I've got to work with is mixed or something. I wasted 1.5g last night.I'm not sure what I'm doing wrong. So yeah, now I've tried it many times and couldn't get good results. I mean I wouldn't want you to go breaking the law or anything like that. Remember, now, this is just for informational purposes. Then tap the mouth of the beaker upside down in your hand and the rock will literally fall into your hand.
MAKING CRACK WITH AMMONIA VIDEO CRACK
Dip the bottom end of the beaker into a pot of hot tap water for a few seconds until the glass gets hot enough to melt the bond of the crack sticking to it. If this happens, empty all of the water from the beaker. Not really a problem, just damned inconvenient to scrape it off the glass because it clings to it. If there's not enough water at this 2nd stage, your coke might cool and harden against the sides or bottom of the beaker. For this stage, you add just enough water for the reheated blob of coke-goo to be able to swim in until it can cool and hardened up into a solid Mass. If made right, crack hardens as it cools. The 2nd heating stage is to turn the rock bubbles into a solid rock. You'll then have hardened crack-bubbles and can go to work on the 2nd stage. Heat slowly until boiling bubbles form for 3-5 seconds, then remove from heat. Mix it well so both powders are fully incorporated into a consistent sludge (absolutely no chunks of coke or soda) BEFORE heating. Make sure it (the mixture of coke, soda, & water) is only slightly thinner than mud consistency, like really WET mud. The main things to consider are the 1.) coke:soda ratio, and 2.) the water that you add in the first stage. If you have an odd size beaker, you can make it work just as well, so long as you understand the practical end of the process. I just want to make that absolutely clear, and the beaker diameter should be 1inch to 1.75inch. That 1/4 inch of water is for the SECOND heating stage, NOT for the first.